MagnetShop.com

Neodymium (NdFeB) Disc Magnets

Click image to enlarge

Neodymium (also known as "NdFeb", "NIB" or "Neo") disc magnets are the most powerful rare-earth magnets available today. Available in disc and cylinder shapes, Neodymium magnets have magnetic properties that far exceed all other permanent magnet materials. They are high in magnetic strength, moderately priced and able to perform well in ambient temperatures. As a result, they are the most widely-used Rare-Earth magnets for industrial, technical, commercial and consumer applications.

Strong Neodymium Disc Magnets in Premium Grades & Sizes

At Magnet Shop, our extensive inventory of licensed neodymium magnets is available for online purchase at bulk discounted prices. Premium NdFeB grades range from N30 to N52, which is the highest grade available in today's market. From micro-sized disc magnets measuring 0.1" in diameter to large cylinder magnets that hold up to 68 lbs, we have a vast selection of neo disc magnets to choose from for virtually any application.

Magnet Shop is Your Source for Strong Neodymium Magnet Discs

Not all of our neodymium disc magnets are shown on this website. Contact us today or send us a special request to let us know what you are looking for, and our staff will help you determine the best solution for your project’s requirements.

* $15.00 total minimum order (excluding shipping & tax if applicable) - Items can be combined to reach the minimum amount.

*Note: The approximate pull info listed is for reference only. These values are calculated assuming the magnet will be attached to a flat, ground 1/2" thick mild steel plate. Coatings, rust, rough surfaces, and certain environmental conditions can significantly reduce the pull force. Please be sure to test the actual pull in your actual application. For critical applications, it is suggested that the pull be de-rated by a factor of 2 or more, depending on the severity of a potential failure.

Neodymium Disc Magnet Features & Characteristics

Neodymium Disc Magnet Manufacturing Methods & Finishes

Our neodymium discs are sintered for optimal magnetic strength. Unless otherwise specified, these disc magnets are magnetized axially (the magnetic field runs through the thickness of the magnet, with each pole located on the flat surfaces of the disc). Available as either uncoated, or with finishing options including nickel (Ni-Cu-Ni) and gold (Ni-Cu-Ni-Au) plated coatings for maximum protection against corrosion & oxidation.

Standard Dimensional Tolerances for NdFeB Disc Magnets

Standard diameter tolerances for Rare Earth Magnets (SmCo & NdFeB) based on the following dimensions:

  • +/- 0.004” on dimensions ranging from 0.040” to 1.000”.
  • +/- 0.008” on dimensions ranging from 1.001” to 2.000”.
  • +/- 0.012” on dimensions ranging from 2.001” to 3.000”.

*Tolerance on thickness is +/-0.004” regardless of size.

Neodymium Disc Magnet Applications

Headphones Reed Switches Home Alarm Systems Hard Disc Drives Magnetic Knife Holder

Neodymium disc magnets have remarkable holding power for their size, so they are ideal for all types of applications. From craft & model making projects to high-performance motors, medical devices, audio components, science and research projects, trade shows, POP displays and much more. Visit our applications page to learn more.

  • Holding Systems Requiring Very High Forces
  • Sensors
  • Reed switches
  • Hard Disc Drives
  • Audio Equipment
  • Acoustic Pick-Ups
  • Headphones & Loudspeakers
  • MRI Scanners
  • Magnetically Coupled Pumps
  • Motors & Generators
  • Magnetic Tool Holders
  • Magnetic Bearings
  • Dental Instruments
  • Door Catches
  • Medical Devices
  • Magnetic Separators
  • Lifting Machinery
  • Crafts & Model Making
  • Hanging Artwork
  • Levitation Device
  • POP Displays
  • Commercial Signage
  • Packaging Closures
  • Jewelry clasps & more

Scroll Left & Right ►

Custom Neodymium Disc Magnets - How Can We Help ?

At Magnet Shop, we can custom-manufacture neodymium disc magnets to your exact specifications. Contact us today or send us a special request and our experienced team of engineers will work with you to determine the best solution for your specialty project. Our sister company, Integrated Magnetics, has over 60 years of expertise in manufacturing complex magnetic assemblies for more technical applications.

Learn More About: